廣西外墻變形縫廠家直銷JCDM型價格
產品價格：￥58（人民幣）
商鋪名稱：貴州堅策建材有限公司
聯系人：錢穩（先生）
聯系手機：
固定電話：
企業郵箱：694675944@qq.com
聯系地址：貴州省黔西南布依族苗族自治州興義市木賈辦楓塘村大寨組142號
郵編：562400
聯系我時，請說是在五金機電網上看到的，謝謝！
商品詳情
Technical Data:
Aluminum
? Extrusion – C/S uses multiple alloys & tempers which are established to be the most appropriate for the given use of individual parts. Will be one of the following: (6063-T5, T6, T52) (6061-T5, T6, T51) (6105-T5, T6) (6005-T5) (6005A-T5, T61), ASTM B221
? Sheet – 6061-T6, 3003-H14, 5005-H34, ASTM B209
Turnbar
? Material – C1075 Blue Temper Spring Steel
? Hardness - RC 44-47
? Finish - “A” Coating (Corrosion Protection)
Standard Loading
? 500 lbs.
Product Description:
This flush mounted metal floor cover is designed for interior or exterior applications. The joint can be designed for up to 100% movement.
Use This Cover For:
? Interior or exterior seismic applications.
? Applications requiring movements up to 100% of joint width.
? Larger sizes available (contact factory).
? Optional waterstop available for wet areas.
Performance Characteristics:
Self-centering aluminum center plate remains flush during thermal movement, but temporarily displaces and slides over floor surface during seismic movement.
Standard Finishes:
Mill finish. Aluminum surfaces in contact with concrete will be pro- tected with a minimum 2 mil coating of a heavy metal free high sol- ids primer.
Installation Guidelines:
The blockouts must be prepared to receive the joint cover. It is rec- ommended that the blockout be formed a minimum of 1/8” deeper to allow the base to be leveled prior to installation of the joint cover.
Apply a high-strength leveling grout to the base of the blockouts to provide a continuous, solid, flat and level base for the joint cover. (Note: The blockouts must be level across the joint opening.) Install
base frames with C/S supplied fasteners. Fasten cover plate to frames with turnbar. Based on the size of the joint, there are recommended tips and tricks for installation at this point. For complete installation instructions, please visit
Aluminum
? Extrusion – C/S uses multiple alloys & tempers which are established to be the most appropriate for the given use of individual parts. Will be one of the following: (6063-T5, T6, T52) (6061-T5, T6, T51) (6105-T5, T6) (6005-T5) (6005A-T5, T61), ASTM B221
? Sheet – 6061-T6, 3003-H14, 5005-H34, ASTM B209
Turnbar
? Material – C1075 Blue Temper Spring Steel
? Hardness - RC 44-47
? Finish - “A” Coating (Corrosion Protection)
Standard Loading
? 500 lbs.
Product Description:
This flush mounted metal floor cover is designed for interior or exterior applications. The joint can be designed for up to 100% movement.
Use This Cover For:
? Interior or exterior seismic applications.
? Applications requiring movements up to 100% of joint width.
? Larger sizes available (contact factory).
? Optional waterstop available for wet areas.
Performance Characteristics:
Self-centering aluminum center plate remains flush during thermal movement, but temporarily displaces and slides over floor surface during seismic movement.
Standard Finishes:
Mill finish. Aluminum surfaces in contact with concrete will be pro- tected with a minimum 2 mil coating of a heavy metal free high sol- ids primer.
Installation Guidelines:
The blockouts must be prepared to receive the joint cover. It is rec- ommended that the blockout be formed a minimum of 1/8” deeper to allow the base to be leveled prior to installation of the joint cover.
Apply a high-strength leveling grout to the base of the blockouts to provide a continuous, solid, flat and level base for the joint cover. (Note: The blockouts must be level across the joint opening.) Install
base frames with C/S supplied fasteners. Fasten cover plate to frames with turnbar. Based on the size of the joint, there are recommended tips and tricks for installation at this point. For complete installation instructions, please visit
